Please contact us here if you wish to purchase Arduino and related products
in large quantities or on an ongoing basis.
Arduino/Genuino Body Board
UNO
The standard Arduino for first-time Arduino users. It’s a microcomputer board with an ATmega 328P installed.
101
The standard Arduino for first-time Arduino users. It’s a microcomputer board with an ATmega 328P installed.
M0 PRO (Zero Pro)
Embedded board with Atmel ATSAMD21G18A. Compared to Uno and Leonard, the hardware is improved with flash memory 256 KB, SRAM 32 KB, clock frequency 48 MHz.
Micro
Micro is an Arduino that is ideal for small breadboards with Leonardo.
Pro/Pro Mini
Small development board with ATmega 328P. Connectors etc. are not mounted. The operating voltage and 3.3V version and 5V version available.
MEGA2560
Compared to UNO this board has more memory, a digital I/O pin increase of 16 pins (UNO)→54 pins (Mega), analog input increase of 6 (UNO) → 16 (Mega). The ADK has an added USB serial converter.
Gemma
It is an Arduino micro compatible machine for wearable with a compact size of 28mm. It is used by sewing it to the fabric with conductive yarn. Can connect to a PC using the USB microB connector.
Yún/Mini
Board equipped with ATmega 32u4 based on Leonard. It has a Linux board with Wi-Fi. Wireless LAN function can be used even in Japan as manufacturers have acquired construction design certification.
Due
Microcontroller board with Atmel SAM3X8E. CAN communication is possible, 54 digital I/O pins, 12ch analog inputs, 4 UART and many inputs and outputs.
Leonardo
Cheap edition of UNO, equipped with the ATmega32u4 chip, allowing for the removal of the USB to serial conversion Chip
Esplora
A microcomputer board derived from Leonardo with a joystick. Equipped with interaction sensors are carried and can be used by those who don’t have much knowledge of electronic circuits.
Mini
Ultra-small board with ATmega 328. It is 30 x 18 mm.
Nano
Base board for small development with ATmega 328. Can connect to product with a USB mini B cable.
ISP
Equipped with ATtiny 44, for bootloader writing. Can connect with micro USB.
ADK
Arduino Mega 2560 R3 based ATmega 2560 equipped ADK compatible hardware.
Arduino/Genuino Shield
-
Ethernet Shield
-
GSM Shield 2
-
WiFi Shield
-
Wireless SD Shield
-
Proto Shield For
Arduino Pro Mini (substrate only) -
ARDUINO Weather Shield
-
ARDUINO Interface Compatible
Evaluation kit
Peripherals & Accessories
-
2.8inch TFT
Touch Shield v2 -
Arduino TFT LCD Screen
-
LCD Shield Kit
-
LilyPad
-
HOLDER TYPE UNO
-
Arduino Bootloader written
ATMega 328 P-PU
(Built-in CR oscillation 8 MHz version)
-
Replacement chip for Arduino Uno
(Bootloader written
ATMega 328 P-PU) -
