Chip One Stop - Shopping Site for Electronic Components and Semiconductors
Menu
China
Change
English
SELECT YOUR LANGUAGE
RMB
SELECT YOUR CURRENCY FOR DISPLAY
About Preferential Rank / Discount

Current price of Item(s) have been applied below.
 


・Preferential Rank and Discount rate will be applied according to your usage of our web service.
・Discount is only applicable to orders from chip1stop web site.
・Discounts may not be applicable to all products and may be subject to MOQ.
・Please contact your representative for details of Preferential Rank.
・No other coupons may be used in conjunction with this discount.

News Center

ADI AD5317R: QUAD, 10-BIT nanoDAC® WITH 2 PPM/°C REFERENCE, SPI INTERFACE

2012/08/07Analog Devices  Analog

 

GENERAL DESCRIPTION
The AD5317R, a member of the nanoDAC® family, is a low power, quad, 10-bit buffered voltage output DAC. The device includes a 2.5 V, 2 ppm/°C internal reference (enabled by default) and a gain select pin giving a full-scale output of 2.5 V (gain = 1) or 5 V (gain = 2). The device operates from a single 2.7 V to 5.5 V supply, is guaranteed monotonic by design, and exhibits less than 0.1% FSR gain error and 1.5 mV offset error performance. The device is available in a 3 mm × 3 mm LFCSP and a TSSOP package.
The AD5317R also incorporates a power-on reset circuit and a RSTSEL pin that ensures that the DAC outputs power up to zero scale or midscale and remain at that level until a valid write takes place. Each part contains a per-channel power-down feature that reduces the current consumption of the device to 4 μA at 3 V while in power-down mode.
The AD5317R employs a versatile SPI interface that operates at clock rates up to 50 MHz and contains a VLOGIC pin intended for 1.8 V/3 V/5 V logic.


Companies Website:
http://components-asiapac.arrow.com/en/new_product/4809/

Analog Devices News Release

Related News Release