STMicroelectronics Debuts Smart, High-Power-Density Motor Driver for Tomorrow’s Industrial Automation 2015/09/16 STMicroelectronics
Microcontrollers
System-in-package integrating microstepping controller and 10 A power MOSFETs
The powerSTEP01 is a a system-in-package integrating 8 N-channel 16 mΩ MOSFETs for stepper applications up to 85 V with a SPI programmable controller, providing fully digital control of the motion through a speed profile generation and positioning calculations.
It integrates a dual low RDS(on)full bridge with embedded non-dissipative overcurrent protection. The device can operate with both voltage mode driving and advanced current control fitting different application needs. The digital control core can generate user defined motion profiles with acceleration, deceleration, speed or a target position easily programmed through a dedicated register set. All application commands and data registers, including those used to set analog values (i.e. current protection trip point, deadtime, PWM frequency, etc.) are sent through a standard 5-Mbit/s SPI. A very rich set of protections (thermal, low bus voltage, overcurrent and motor stall) make the powerSTEP01 “bullet proof”, as required by the most demanding motor control applications.
Visit Chip1Stop Chinese site Visit Chip1Stop Korean site Visit Chip1Stop English site Visit Chip1Stop German site
Companies Website:
http://www.st.com/
STMicroelectronics News Release
2025/04/21 STMicroelectronics
Sensor
2025/04/18 STMicroelectronics
Microcontrollers
2025/04/16 STMicroelectronics
Processor/Memory
2025/04/14 STMicroelectronics
Company / Market Trends
2025/04/10 STMicroelectronics
Power Supply
Related News Release
2025/04/18
STMicroelectronics
Microcontrollers
2025/03/14
STMicroelectronics
Microcontrollers
2025/03/13
STMicroelectronics
Microcontrollers
2025/03/11
STMicroelectronics
Microcontrollers
2025/02/26
STMicroelectronics
Microcontrollers