STMicroelectronics Debuts Smart, High-Power-Density Motor Driver for Tomorrow’s Industrial Automation
2015/09/16STMicroelectronics
微控制器
System-in-package integrating microstepping controller and 10 A power MOSFETs
The powerSTEP01 is a a system-in-package integrating 8 N-channel 16 mΩ MOSFETs for stepper applications up to 85 V with a SPI programmable controller, providing fully digital control of the motion through a speed profile generation and positioning calculations.
It integrates a dual low RDS(on)full bridge with embedded non-dissipative overcurrent protection. The device can operate with both voltage mode driving and advanced current control fitting different application needs. The digital control core can generate user defined motion profiles with acceleration, deceleration, speed or a target position easily programmed through a dedicated register set. All application commands and data registers, including those used to set analog values (i.e. current protection trip point, deadtime, PWM frequency, etc.) are sent through a standard 5-Mbit/s SPI. A very rich set of protections (thermal, low bus voltage, overcurrent and motor stall) make the powerSTEP01 “bullet proof”, as required by the most demanding motor control applications.
Visit Chip1Stop Chinese site
Visit Chip1Stop Korean site
Visit Chip1Stop English site
Visit Chip1Stop German site
企业HP:
http://www.st.com/
STMicroelectronics新闻发布
-
2020/04/23STMicroelectronics
企业/市场走向
-
2020/03/19STMicroelectronics
汽车
-
2016/07/28STMicroelectronics
企业/市场走向
-
2015/12/16STMicroelectronics
电源/电力
-
2015/10/14STMicroelectronics
模拟