| 2022/05/12 |
|
PCN（产品规格变更通知）
|
NXP announces DDE as an additional substrate supplier for i.MX8M Plus parts.
DDE uses a similar BOM (Bill of Material) as the original qualified substrate supplier, Semco.
Effective date: May 12, 2022 |
| 2022/05/23 |
|
PCN（产品规格变更通知）
|
NXP Semiconductors announces a change to the Country Of Origin listed on the Product Label
for the Republic of Korea.
Beginning the week of May 23, 2022, the NXP Product Label will list the Country Of Origin as SOUTH KOREA.
Reason
To standardize all product packaging label from the Republic of Korea with one Country Of Origin listing. |
| 2023/04/03 |
|
PCN（产品规格变更通知）
|
i.MX 8M Plus Consumer and Industrial Datasheet Update to Rev.2 |
| 2023/05/27 |
|
PCN（产品规格变更通知）
|
Linux Kernel GPLv2 License Breach Introduced in Q4’2022 Linux Factory Release LF 5.15.71_2.2.0 has been distributed to customers
Remarks
NXP has released two patches on Feb 9th 2023 on NXP’s GitHub repository “nxp-imx/linux-imx” to fix the problem.
These patches will roll back the license to “GPL v2.0 only” for all affected source files
and make them compliant with Linux kernel licensing scheme.
The patches also remove author’s email ID from the code comments.
The following are the patches accessible by customers on GitHub to remedy the problem.
1. LF-8313-1: Update License to GPL-2.0
2. LF-8313-2: Update License to GPL-2.0
Customers using EVKs for evaluation can download the new images/binaries from the following link
and continue to their evaluation.
https://www.nxp.com/design/software/embedded-software/i-mx-software/embedded-linux-for-i-mx-applications-processors:IMXLINUX |
| 2023/08/26 |
|
PCN（产品规格变更通知）
|
NXP Semiconductors announces Industrial and Consumer Datasheet (DS) update for i.MX 8M Plus torevision 2.1.
The revision history included in the updated document provides a detailed description of thechanges.
Highlighted Changes:
• Reverted the values of the clocks frequency back to Rev. 1 in the Table 13, "Maximum frequency ofmodules".
Please refer to the datasheet revision history table for the complete list of clocks that have beenupdated.
• For Video_PLL1, updated the clock output range value from "up to 650 MHz" to "650 MHz - 1190 MHz"
inTable 25, "PLL electrical parameters". |
| 2024/03/11 |
|
PCN（产品规格变更通知）
|
NXP Semiconductors announces the i.MX 8M Plus Reference Manual (IMX8MPRM) update from Rev. 1 to Rev. 2. |
| 2024/10/03 |
|
PCN（产品规格变更通知）
|
Supplier Notice No.:202409014I
Title:
i.MX 8M Plus Consumer and Industrial Datasheet Update to Rev.2.2
Description:
NXP Semiconductors announces that the i.MX 8M Plus applications processor Industrial and Consumer Data Sheets have been updated to revision 2.2. The revision history included in the updated documents provide a detailed description of the changes.
Highlighted Changes:
• Added four additional orderable part numbers that are covered by the data sheets - two consumer qualification part numbers and two industrial qualification part numbers.
The i.MX 8M Plus Industrial and Consumer Datasheet Rev.2.2 are attached to this notice, and can be found at:
https://www.nxp.com/webapp/Download?colCode=IMX8MPIEC
https://www.nxp.com/webapp/Download?colCode=IMX8MPCEC
Reason:
The data sheets have been updated to include additional orderable part numbers.
Anticipated Impact on Form, Fit, Function, Reliability or Quality:
No Impact on form, fit, function, reliability or quality
Effective Date:
Oct 03, 2024
|
| 2024/10/04 |
|
PCN（产品规格变更通知）
|
i.MX 8M Plus GP5_LOCK eFuse Programming Update |
| 2024/10/14 |
|
PCN（产品规格变更通知）
|
Errata change summary for the i.MX 8M Plus:
The following part numbers have been added to this Errata:
• MIMX8ML8DVNLZCB
• MIMX8ML8DVNLZDB
• MIMX8ML5CVNKZAB
• MIMX8ML5DVNLZAB
• MIMX8ML2CVNKZAB
• MIMX8ML2DVNLZAB
The following new erratum have been added:
• ERR052162: ISI: System might stall in memory-to-memory operations
• ERR052318: SJC: The Secure Debug mode is not functional
• ERR052039 Core: Cortex-M hang if stopped from Cortex-A |
| 2025/05/26 |
|
PCN（产品规格变更通知）
|
Supplier Notice No.:202504007I
Title:Freescale Logo to NXP Logo Product Marking Conversion for All Remaining Former Freescale Products(4/7)
Description:
Previously, NXP Semiconductors announced with General Notification 202502001G (16-Feb-2025) the Freescale logo to NXP logo product marking conversion for all former Freescale products not previously converted.
Now, for customer convenience, NXP Semiconductors provides a follow-up series of Customer Information Notifications (CINs) to relay to customers their impacted products. Note that due to the extensive product list, your organization may indeed receive multiple CIN notifications to encompass your impacted products.
Reason:
This NXP marking initiative achieves unified NXP branding for the entire portfolio.
Customer Information Notification to relay to customers their impacted products.
Anticipated Impact on Form, Fit, Function, Reliability or Quality :
No Impact on form, fit, function, reliability or quality |
