正規品を、安心して選べる。半導体・電子部品の通販サイト
Menu
中文
SELECT YOUR LANGUAGE
人民币
SELECT YOUR CURRENCY FOR DISPLAY
優遇ステージ/割引率について

現在の商品表示価格は下記が適用されています。


・お客様のご利用状況によって優遇ステージと割引率が適用されます。
・割引に関しましては当WEBサイトからの直接のご注文に限ります。
・一部優遇ステージ対象割引にならない製品や数量がございます。
・優遇ステージの詳細はお客様担当へご確認ください。
・その他の割引とは併用できません。

新闻中心

TI introduces the first brushed DC gate driver with adjustable current drive capability for scalable designs

2015/07/24Texas Instruments  电源/电力


Description


The DRV8701 is a single H-bridge gate driver that uses four external N-channel MOSFETs targeted to drive a 12-V to 24-V bidirectional brushed DC motor.


A PH/EN (DRV8701E) or PWM (DRV8701P) interface allows simple interfacing to controller circuits. An internal sense amplifier allows for adjustable current control. The gate driver includes circuitry to regulate the winding current using fixed off-time PWM current chopping.


DRV8701 drives both high- and low-side FETs with 9.5-V VGS gate drive. The gate drive current for all external FETs is configurable with a single external resistor on the IDRIVE pin.


A low-power sleep mode is provided which shuts down internal circuitry to achieve very-low quiescent current draw. This sleep mode can be set by taking the nSLEEP pin low.


Internal protection functions are provided: undervoltage lockout, charge pump faults, overcurrent shutdown, short-circuit protection, predriver faults, and overtemperature. Fault conditions are indicated on the nFAULT pin.

Features


Single H-Bridge Gate Driver Drives Four External N-Channel MOSFETs
Supports 100% PWM Duty Cycle


5.9-V to 45-V Operating Supply Voltage Range
Two Control Interface Options PH/EN (DRV8701E)
PWM (DRV8701P)


Adjustable Gate Drive (5 Levels) 6-mA to 150-mA Source Current
12.5-mA to 300-mA Sink Current


Supports 1.8-V, 3.3-V, and 5-V Logic Inputs
Current Shunt Amplifier (20 V/V)
Integrated PWM Current Regulation Limits Motor Inrush Current


Low-Power Sleep Mode (9 µA)
Two LDO Voltage Regulators to Power External
Components AVDD: 4.8 V, up to 30-mA Output Load
DVDD: 3.3 V, up to 30-mA Output Load


Small Package and Footprint 24-Pin VQFN (PowerPAD™)
4.0 × 4.0 × 0.9 mm


Protection Features: VM Undervoltage Lockout (UVLO)
Charge Pump Undervoltage (CPUV)
Overcurrent Protection (OCP)
Pre-Driver Fault (PDF)
Thermal Shutdown (TSD)
Fault Condition Output (nFAULT)

 


Visit Chip1Stop Chinese site
Visit Chip1Stop Korean site
Visit Chip1Stop English site
Visit Chip1Stop German site











企业HP:
http://www.ti.com/

Texas Instruments新闻发布

相关新闻