NEW SMD High Volt Power Inductors PISPHV
2017/07/04Fastron
模拟
FASTRON announces several models of SMD power inductors for high voltage applications!
The new HV-models are designed to resist operating voltages up to 400 Volt DC and have the ability to withstand much higher short term voltage spikes. Due to the low resistance, the choke provides minor self-heating and therefore adds minimal heat to your application.
The models, PISMHV, PISNHV and - brand new - the PISPHV, share the same base-plate size of 9,55mm x 13,0mm. For higher current requirements FASTRON offers the PISTHV with a base size of 15,2mm x 18,7mm.
Similar to the standard (non HV) models the PISMHV, PISPHV, PISNHV and PISTHV series are applicable in high temperature environments and special applications where high resilience is necessary.
The key-data of the new HV parts are:
・PISMHV: inductance up to 2,2mH, current up to 3,32A; height 5,35mm
・PISPHV: inductance up to 10mH, current up to 3,15A; height 8,0mm
・PISNHV: inductance up to 10mH, current up to 3,27A; height 11,5mm
・PISTHV: inductance up to 10mH, current up to 4,9A; height 12,0mm.
Main applications for the new HV inductors are power supplies, filters and noise suppression.
The components are suitable for lead-free soldering and as with all FASTRON components are
RoHS conform.
Please find attached the datasheet of PISPHV.
Visit Chip1Stop Chinese site
Visit Chip1Stop Korean site
Visit Chip1Stop English site
Visit Chip1Stop German site
企业HP:
http://www.fastrongroup.com/home
Fastron新闻发布
-
2023/08/29Fastron
被动/连接/机械构件
-
-
2018/05/09Fastron
被动/连接/机械构件
-
2018/03/20Fastron
被动/连接/机械构件
-